Hazard Communication Plan

Quick Guide to Chemical Spills and Releases

H. Emergency Procedures

H1. Chemical Spills

The time to prepare to handle a spill is long before it occurs. Appropriate precautions and the proper equipment will alleviate many of the potential complications associated with the spill of a hazardous material. The following principles will decrease the likelihood of a spill:

Anticipate chemical spills by having appropriate cleanup and safety equipment on hand. These cleanup supplies should be consistent with the hazards and quantities of substances used.

Paper towels and sponges may be used as absorbent type cleanup aids but this should be done cautiously. Paper used to clean up oxidizers can later ignite and appropriate gloves should be worn when cleaning toxic materials with towels. Sponges should be chemical resistant.

Commercial clean-up kits are available that have instructions, absorbants, neutralizers, and protective equipment. These kits should be located strategically around the department area.

If a spill does occur, the following general procedures may be used:

When the nature of the spill constitutes a more serious hazard or involves the release of gas or fumes, the following procedures should be followed:

H2. General Emergency Procedures

Everyone must be familiar with Colgate University's Emergency Response Plan. The following additional procedures are intended to limit injuries and minimize damage should an accident occur:

In the case of a medical emergency, remain calm and do only what is necessary to protect life.

H3. Fires and Explosions

Small fires can easily be extinguished without evacuating the building or calling the fire department. However, even a small fire can quickly become a serious problem. The first few minutes are critical to preventing a larger emergency. The following actions should be taken by personnel in the event of a minor fire:

If there is any doubt whether the fire can be controlled locally by available personnel or equipment, the following actions should be taken:

  1. Activate the emergency alarm system.
  2. Confine the fire (close window, doors between rooms, and fire doors) to prevent further spread of the fire.
  3. Assist injured personnel.
  4. Evacuate the building; move to an assemble point for accountability. (See the Emergency Response Plan for your assembly area.)

H4. Personal Contamination

Last modified: April 08, 1998